Active Drive Control; Active Drive With Low Control - Jeep RENEGADE 2016 User Manual

OFF-ROAD CAPABILITIES
Active Drive Control — If Equipped
The Power Transfer Unit (PTU) is locked
to ensure immediate availability of
torque to the rear drive axles. This feature
is selectable in AUTO mode and auto-
matic in the other driving mode. 4WD
LOCK can be enabled by the following
ways:
• When the 4WD LOCK button is
pushed.
• When the Selec-Terrain switch is ro-
tated from AUTO to any other off-road
modes.
Active Drive With Low Control — (Trailhawk models only)
The 4WD LOW mode helps to improve the
off-road performance in all modes. To
enable 4WD Low, please follow the steps
below:
Enabling 4WD LOW
With the vehicle stationary, the ignition in
the MAR/RUN or with the engine run-
ning, shift the transmission into NEU-
TRAL and push the button once 4WD
LOW. The EVIC/DID will display the mes-
sage "4WD LOW" once the shift is com-
plete.
NOTE:
• Both LOCK and LOW LEDs will blink
and then become active on the Selec-Terrain switch until the shift is complete.
• The EVIC display will illuminate the "4WD Low" icon.
Disabling 4WD LOW
To disable the 4WD LOW mode, the vehicle must be stationary and the transmission
shifted into NEUTRAL. Push the 4WD LOW button once.
Selec-Terrain Switch
Selec-Terrain Switch (Trailhawk)
155