ICRealtime F Series User Manual page 8

Wire Network
Network Protocol
Remote
Operation
Restore Default
Setup
IR light
Power
Power
Consumption
Working
Temperature
Working
Humidify
Dimensions(mm)
Weight
Installation
Model
Parameter
Main Processor
OS
System
Resources
User Interface
System Status
Image Sensor
Pixel
Day/night
Gain Control
White Balance
BLC
Exposure Mode
Video
Compression
Standard
Video Frame
Rate
Video Bit Rate
1-ch 10/100 M Ethernet , RJ45 port
HTTP, TCP/IP, ARP, RTSP, RTP,UDP, RTCP, SMTP, FTP, DHCP,
DNS, DDNS, PPPOE, IPv4/6, SNMP, UPNP, NTP
Monitor, system setup, file download, log information, maintenance ,
upgrade and etc
Built-in Reset button
IR light 15M.
DC12V power and PoE.
Warning！
Do not connect these two power supplying sources to the device
at the same time; it may result in device damage!
4.5W MAX
-20℃~+60℃
≤95%
Φ 113×86
280g (Excluding box)
Ceiling and wall mount
IP-73
High performance DSP
Embedded LINUX
Support real-time network, local record, and remote operation at the
same time.
Remote operation interface such as WEB, DSS, PSS
Bit stream statistics, log, and software version.
1/3-inch CMOS
1280(H)*960(V)
Support day/night mode switch
Fixed/Auto
Manual/Auto
On/Off
Manual/Low noise/Low motion blur/Auto
It ranges from 1/3 to 1/10000
H.264/H.264H/MJPEG
Note: Some versions do not support H.264H.
PAL:
Main stream (1280*960@25fps),
extra stream ( 704*576@25fps)
NTSC:
Main stream (1280*960@30fps),
extra stream ( 704*480@30fps)
H.264: 56Kbps-8192Kbps
MJPEG: adjustable and bit rate is adjustable.
3