ICRealtime F Series User Manual
Hd ir waterproof fixed network camera
Hide thumbs
Also See for F Series:
- User manual (42 pages) ,
- Quick start manual (17 pages) ,
- User manual (28 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ICRealtime F Series
Summary of Contents for ICRealtime F Series
- Page 1 HD IR Waterproof Fixed Network Camera User’s Manual Version 4.0.2...
- Page 2 Welcome Thank you for purchasing our network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!
-
Page 3: Important Safeguards And Warnings
Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please note: Do not connect two power supplying sources to the device at the same time;... - Page 4 Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device.
-
Page 5: Table Of Contents
Table of Contents General Introduction ........................1 Overview ........................1 Features ......................... 1 Specifications ........................ 2 1.3.1 Performance ......................2 Structure ............................4 Multiple-function Combination Cable ................ 4 Framework and Dimension ..................5 Bidirectional talk......................6 2.3.1 Device-end to PC-end ..................6 2.3.2 PC-end to the Device-end .................. -
Page 6: General Introduction
1 General Introduction 1.1 Overview This series network camera integrates the traditional camera and network video technology. It adopts audio and video data collection, transmission together. It can connect to the network directly without any auxiliary device. This series network camera uses standard H.264 video compression technology and G.711a audio compression technology, which maximally guarantee the audio and video quality. -
Page 7: Specifications
Log function Support system resource information and running status real-time display. Day/Night mode auto switch. Built-in IR light. Support IR night vision. Assistant Support picture parameter setup such as electronic shutter and gain setup. Function ... - Page 8 Lens 8~16mm @F1.6 Lens Interface C/CS. Lens is the default accessories 1-channel,LINE IN Audio Input 1-channel, 3.5mm JACK SPEAK OUT. Audio Output Bidirectional Reuse the first audio input channel Talk Input Audio Bit Rate 16kbps 16BIT Audio Compression G.711A/G.711Mu Standard 396 (18*22) detection zones;...
-
Page 9: Structure
2 Structure 2.1 Multiple-function Combination Cable You can refer to the following figure for multiple-function combination cable information. See Figure Figure 2-1 Multiple-function combination cable Please refer to the following sheet for detailed information. Port Name Function Connection Note Video output Output analog video signal. -
Page 10: Framework And Dimension
Port Name Function Connection Note Power port. Input DC 12V or AC 24V. Default is a DC 5.5 round port to 2-pin converter cable Please note： Power input POWER port Connect the DC5.5 round port to 2-pin converter cable (Provided) when you are using AC 24V series product. -
Page 11: Bidirectional Talk
Figure 2-3 Dimension illustration 2 2.3 Bidirectional talk 2.3.1 Device-end to PC-end Device Connection Please connect the speaker or the MIC to the audio input port of the device. Then connect the earphone to the audio output port of the PC. Login the Web and then click the Talk button to enable the bidirectional talk function. - Page 12 2) Connect the alarm output device to the alarm output port (No.2 pin) and alarm output public port (No.1 pin). The alarm output port supports NO (normal open) alarm device only. 3) Open the Web, go to the Figure 2-4. Please set the alarm input 01 port for the first channel of the I/O cable (No.3 pin).
- Page 13 Figure 2-6 Alarm output...
-
Page 14: Device Installation
3 Device Installation Please follow the steps listed below to install the device. Please refer to Figure 3-1 for reference. Please line up the installation holes of the bottom of the device to the installation holes in the front part of the bracket. Then insert the screws to the holes to fasten the device on the bracket. -
Page 15: Quick Configuration Tool
4 Quick Configuration Tool 4.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 4.2 Operation Double click the “ConfigTools.exe”... - Page 16 In the configuration tool search interface (Figure 4-1), please select a device IP address and then double click it to open the login interface. Or you can select an IP address and then click the Login button to go to the login interface. See Figure 4-3. In Figure 4-3, you can view device IP address, user name, password and port.
-
Page 17: Web Operation
5 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 5.1 Network Connection Please follow the steps listed below for network connection. ... - Page 18 Figure 5- 2 Web login If it is your first time to log in, system pops up warning information to ask you whether install web plug- in or not after you logged in for one minute. For detailed plug-in installation, please refer to the Web Operation Manual included in the resource CD.
- Page 19 Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction.
-
Page 20: Faq
6 FAQ I can not boot up Please click RESET button for at least five seconds to restore the device. factory default setup. card write Do not set the SD card as the storage media to storage the times schedule record file. It may damage the SD card duration. I can not use the When disk information is shown as hibernation or capacity is 0, disk as the storage... -
Page 21: Appendix Toxic Or Hazardous Materials Or Elements
Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Circuit Board ○ ○ ○ ○ ○ ○ Component Device ○ ○ ○ ○ ○ ○ Construction Material ○ ○ ○ ○ ○...
Need help?
Do you have a question about the F Series and is the answer not in the manual?
Questions and answers