Adjusting A Headlight Beam - Yamaha KODIAK 700 YFM70KDXG Owner's Manual

4. Remove the burnt-out bulb by pulling it out.
5. Place a new headlight bulb into position.
NOTICE: Do not touch the glass part of the
headlight bulb to keep it free from oil, oth-
erwise the transparency of the glass, the
luminosity of the bulb, and the bulb life will
be adversely affected. Thoroughly clean
off any dirt and fingerprints on the head-
light bulb using a cloth moistened with al-
cohol or thinner.
8
1. Do not touch the glass part of the bulb.
6. Install the bulb holder by pushing it in and
turning it clockwise.
[ECB00652]
7. Install the bulb holder cover. NOTICE: Make
sure the headlight bulb holder cover is se-
curely fitted over the bulb holder and seat-
ed properly.
[ECB00672]
8. Install the headlight cover as shown, and then
install the quick fasteners.
1. Headlight cover
9. Adjust the headlight beam if necessary.
EBU25553

Adjusting a headlight beam

ECB00691
NOTICE
It is advisable to have a Yamaha dealer make
this adjustment.
8-62
1