Installing A Wheel - Yamaha KODIAK 700 YFM70KDXG Owner's Manual

EBU25702

Installing a wheel

1. Place the ATV on a level surface.
2. Install the wheel and the nuts.
TIP
 The arrow mark
ward the rotating direction of the wheel.
 Tapered nuts are used for both the front and
rear wheels. Install the nuts with their tapered
side towards the wheel.
1. Arrow mark
on the tire must point to-
1
1
1. Tapered nut
3. Lower the ATV to the ground.
4. Tighten the wheel nuts to the specified
torques.
Tightening torques:
Front wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
8-65
8