1. Headlight bulb holder cover
3. Remove the headlight bulb holder by pushing
it in and turning it counterclockwise.
8
1. Headlight bulb holder
1
1
1. Do not touch the glass part of the bulb.
8-60
4. Remove the burnt-out bulb by pulling it out.
5. Place a new headlight bulb into position.
NOTICE: Do not touch the glass part of the
headlight bulb to keep it free from oil, oth-
erwise the transparency of the glass, the
luminosity of the bulb, and the bulb life will
be adversely affected. Thoroughly clean
off any dirt and fingerprints on the head-
light bulb using a cloth moistened with al-
cohol or thinner.
[ECB00652]
6. Install the bulb holder by pushing it in and
turning it clockwise.