Yamaha YZ85G Owner's Manual page 40

For your safety – pre-operation checks
ITEM
Drive chain
Wheels and tires
Shift pedal
Brake pedal
Brake and clutch le-
vers
5
Steering
Front fork and rear
shock absorber as-
sembly
Chassis fasteners
Moving parts and ca-
bles
Exhaust system
Engine stop switch
Ignition system
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Check for loose spokes and tighten if necessary.
• Make sure that operation is smooth.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting point if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Check that the handlebar can be turned smoothly and
has no excessive play.
• Check that they operate smoothly and there is no oil
leakage.
• Make sure that all nuts, bolts and screws are properly
tightened.
• Tighten if necessary.
• Check that the control cables move smoothly.
• Check that the control cables are not caught when the
handlebars are turned or when the front forks travel up
and down.
• Lubricate moving parts and cables if necessary.
• Check that the exhaust pipe is tightly mounted and has
no cracks.
• Check for leakage.
• Check operation.
• Check that all leads and cables are properly connected.
5-2
CHECKS PAGE
7-21,
7-23
7-14,
7-16
7-18
7-25
7-24
7-27
4-8,
4-10,
4-10,
7-26
—
7-23,
7-24,
7-26,
7-25
—
4-1
7-6