Yamaha F6A Owner's Manual page 36

EMU01293
Throttle friction adjusting screw/knob
A friction device in the tiller handle provide
resistance to movement of the throttle grip.
This is adjustable for operator preference.
An adjusting screw/knob is located within
the tiller handle.
Resistance
Increase
Decrease
When constant speed is desired, tighten the
adjusting screw/bolt to maintain the desired
throttle setting.
WARNING
@
Do not over tighten the friction adjusting
screw/knob.
If there is too much resistance, it may be
difficult to move the throttle grip, which
could result in an accident.
@
2-9
Knob/Screw
Turn clockwise
Turn counterclockwise
GB