Yamaha F6A Owner's Manual page 122

EMU00334¯
1) Wash the motor body using fresh water.
(Refer to "MOTOR EXTERIOR")
2) Remove the fuel-line connection(s) or
shut off the fuel valve, if equipped. from
the motor.
3) Run the engine at idling speed supply-
ing fresh water to flush the cooling-water
passages until the fuel system becomes
empty and the engine stops. (Refer to
"Flushing Cooling System")
4) Remove the battery for Electric start
model. (Refer to "Disconnecting the Bat-
tery")
5) Drain the cooling water completely out
of the motor. Clean the body thoroughly.
6) Remove the spark plug(s).
7) Pour a teaspoonful of clean engine oil
into the cylinder(s).
8) Crank several time manually.
9) Replace the spark plug(s).
EMU00337
Fuel Tank
1) Drain the fuel from the tank for a long
period of storage.
2) Store the fuel tank in a dry, well-venti-
lated place, not in direct sunlight.
WARNING
@
The fuel tank supplied with this engine is
its dedicated fuel reservoir and must not
be used as a fuel storage container.
Commercial users should conform to rel-
evant licensing or approval authority reg-
ulations.
@
4-11
GB