Yamaha F6A Owner's Manual page 148

NOTE:
@
If a torque wrench is not available when you
are installing the drain plug, finger tighten
the bolt just until the gasket contacts the sur-
face of the drain hole. Then tighten 1/4 - 1/2
turn. Have the drain plug torqued to the cor-
rect value with a torque wrench as soon as
possible.
@
4) Remove the oil filler cap 2. Add the cor-
rect amount of oil through the filler hole.
Reinstall the filler cap.
Engine oil grade/capacity:
Refer to SPECIFICATIONS on page 4-1.
5) Start the engine and watch to make sure
the Low oil pressure warning lamp turns
off. Make sure that there are no oil
leaks.
CAUTION:
@
If the oil lamp does not turn off, or if there
are oil leaks, stop the engine and find the
cause. Continued operation with a prob-
lem could cause severe engine damage.
If the problem cannot be found and cor-
rected, consult your Yamaha dealer.
@
6) Turn off the engine and wait 3 minutes.
Recheck oil level using the oil dipstick. If
necessary, add oil to upper level.
7) Dispose of used oil according to local
regulations.
NOTE:
@
For disposal of used oil consult your
Yamaha dealer.
The oil should be changed more often
when the engine is operated under
adverse conditions such as extended
trolling.
@
4-37
GB