Yamaha YZF-R6 Owner's Manual page 95

thoroughly cleaned with mild de-
tergent, alkaline products and a
soft brush may be used.
G Never use compounds or other
special treatments to clean the tita-
nium muffler, as they will remove
the finish on the outer surface of
the muffler.
G
Even the smallest amounts of oil,
such as from oily towels or finger-
prints, will leave stains on the tita-
nium muffler, which
removed with a mild detergent.
G
Note that the thermally induced
discoloring of the portion of the ex-
haust pipe leading into the titanium
muffler is normal and cannot be re-
moved.
After cleaning
1. Dry the motorcycle with a chamois
or an absorbing cloth.
2. Immediately dry the drive chain
and lubricate it to prevent it from
rusting.
3. Use a chrome polish to shine
chrome, aluminum and stainless-
steel parts.
4. To prevent corrosion, it is recom-
mended to apply a corrosion pro-
tection spray
including chrome- and nickel-plat-
ed, surfaces.
5. Use spray oil as a universal clean-
er to remove any remaining dirt.
6. Touch up minor paint damage
caused by stones, etc.
7. Wax all painted surfaces.
8. Let the motorcycle dry completely
can be before storing or covering it.
WARNING
G Make sure that there is no oil or
wax on the brakes or tires.
G
If necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or ac-
etone, and wash the tires with
warm water and a mild deter-
gent. Before riding at higher
speeds, test the motorcycle's
braking performance and cor-
nering behavior.
MOTORCYCLE CARE AND STORAGE
on all metal,
EWA11130
7-3
CAUTION:
G
Apply spray oil and wax spar-
ingly and make sure to wipe off
any excess.
G Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.
G
Avoid using abrasive polishing
compounds as they will wear
away the paint.
NOTE:
Consult a Yamaha dealer for advice on
what products to use.
ECA10800
7