Yamaha YZF-R6 Owner's Manual page 57

1. Cowling D
2. Bolt
3. Turn signal light lead coupler
4. Quick fastener
1. Quick fastener
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Quick fastener screw
To install the cowling
1. Place the cowling in the original
position, and then install the bolts,
quick fasteners, and quick fastener
screw.
2. Connect the turn signal light lead
coupler.
3. Install cowling A (to complete the
installation of cowling C) or cowl-
ing B (to complete the installation
of cowling D).
Cowling E
To remove the cowling
1. Remove cowling B and panel B.
(See page 6-6.)
6-8
2. Unfasten the wire harness by
pressing on the tab to open the
plastic fastener.
1. Plastic fastener
2. Tab
3. Wire harness
3. Remove the bolts and the quick
fastener, and then pull the cowling
off as shown.
EAU39091
6