Yamaha YZF-R6 Owner's Manual page 83

3. Unhook the headlight bulb holder,
and then remove the defective
bulb.
1. Headlight bulb holder
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
CAUTION:
Take care not to damage the follow-
ing parts:
PERIODIC MAINTENANCE AND MINOR REPAIR
G
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
G
Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
EWA10790
lens.
Do not use a headlight bulb of a
wattage higher than specified.
ECA10650
1. Do not touch the glass part of the bulb.
5. Connect the headlight coupler.
6. Install the headlight bulb cover by
7. Have a Yamaha dealer adjust the
6-34
turning it clockwise.
headlight beam if necessary.
6