Helmet Holding Cable - Yamaha YZF-R6 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Helmet holding cable

3
1. Helmet holding cable
2. Helmet cable holder
3. Middle snap hook
A helmet holding cable is provided in
the owner's tool kit to secure two hel-
mets to the helmet cable holder
equipped on the bottom of the passen-
ger seat.
To secure a helmet with the helmet
holding cable
1. Remove the passenger seat. (See
page 3-19.)
2. Clip the middle snap hook of the
cable onto the cable holder.
EAU39072 3. Pass one of the other snap hooks
of the cable through the helmet
strap buckle, and then clip the
snap hook onto the cable holder as
shown.
1. Helmet holding cable
2. Helmet
4. Install the passenger seat.
1. Helmet holding cable
2. Helmet
3-20
WARNING
Never ride with a helmet attached to
a helmet holding cable, since the
helmet may hit objects, causing loss
of control and possibly an accident.
To release a helmet from the helmet
holding cable
1. Remove the passenger seat.
2. Unfasten the snap hooks from the
cable holder, and then remove the
cable from the helmet strap buck-
le.
3. Install the passenger seat.
EWA14330