Removing A Wheel; Installing A Wheel - Yamaha YFM09RYXH Owner's Manual

2. Remove the blown fuse, and then install a
new fuse of the specified amperage.
WARNING! Always use a fuse of the spec-
ified rating, and never use a substitute ob-
ject in place of the proper fuse. An
improper fuse or a substitute object can
cause damage to the electrical system,
which could lead to a fire.
Specified fuse:
7.5 A
3. Turn the key to "ON" and turn on the electrical
circuits to check if the devices operate.
4. If the fuse immediately blows again, have a
Yamaha dealer check the electrical system.
8
EBU34030

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel bolts.
[EWB02173]
8-34
1
1. Wheel bolt
3. Elevate the ATV and place a suitable stand
under the frame.
4. Remove the bolts from the wheel.
5. Remove the wheel.
EBU34041

Installing a wheel

1. Install the wheel and the bolts.
TIP
When installing the wheel, make sure its arrow
mark points toward the rotating direction of
the wheel.
1