Yamaha YFM09RYXH Owner's Manual page 95

4
3
2
1
1. Engine oil drain bolt
2. O-ring
3. Compression spring
4. Oil strainer
5. Clean the oil strainer with solvent.
6. Apply a thin coat of clean engine oil to a new
O-ring.
7. Install the oil strainer, the compression
spring, the new O-ring and the engine oil
drain bolt. Tighten the engine oil drain bolt to
the specified torque. NOTICE: Before in-
stalling the engine oil drain bolt, be sure to
install the O-ring, compression spring and
oil strainer.
[ECB00322]
Tightening torque:
Engine oil drain bolt:
15 Nm (1.5 m·kgf, 10 ft·lbf)
8. Refill with the specified amount of the recom-
mended engine oil, and then install and tight-
en the engine oil filler cap.
Recommended oil:
See page 10-1.
Oil quantity:
0.90 L (0.95 US qt, 0.79 Imp.qt)
TIP
Be sure to wipe off spilled oil on any parts after the
engine and exhaust system have cooled down.
ECB00331
NOTICE
 Do not use oils with a diesel specification of
"CD" or oils of a higher quality than speci-
fied. In addition, do not use oils labeled "EN-
ERGY CONSERVING II" or higher.
 Make sure that no foreign material enters the
crankcase.
8-13
8