Yamaha XMAX YP250R Owner's Manual page 25

4. Push the "RESET" button to set
the minutes.
5. Push the "SELECT" button and
then release it to start the clock.
Ambient temperature display
Pushing the "SELECT" button for at
least two seconds switches the clock
display to the ambient temperature
display. This display shows the
ambient temperature from –10 °C to
50 °C in 1 °C increments. The tempe-
rature displayed may vary from the
ambient temperature. Pushing the
"SELECT" button for at least two
seconds switches the ambient tem-
perature display to the clock display.
INSTRUMENT AND CONTROL FUNCTIONS
TIP
G
If the ambient temperature falls
below –10 °C, a lower temperatu-
re than –10 °C will not be displa-
yed.
G
If the ambient temperature
climbs above 50 °C, a higher
temperature than 50 °C will not
be displayed.
G
The accuracy of the temperature
reading may be affected when
riding slowly (approximately
under 20 km/h (12.5 mi/h)) or
when stopped at traffic signals,
railroad crossings, etc.
3-10
3