Yamaha XMAX YP250R Owner's Manual page 23

rature warning indicator flash, stop
the vehicle and let the engine cool.
(See page 6-30).
NOTICE
Do not continue to operate the
engine if it is overheating.
Oil change indicator "OIL"
This indicator flashes at the initial
1000 km (600 mi), then at 4000 km
(2500 mi) and every 3000 km (1800
mi) thereafter to indicate that the
engine oil should be changed.
After changing the engine oil, reset
the oil change indicator. (See page
6-10).
INSTRUMENT AND CONTROL FUNCTIONS
If the engine oil is changed before the
oil change indicator comes on (i.e.
before the periodic oil change interval
has been reached), the indicator must
be reset after the oil change for the
next periodic oil change to be indica-
ted at the correct time. (See page
6-10).
The electrical circuit of the indicator
can be checked according to the
following procedure.
1. Turn the key to "ON".
2. Check that the indicator comes
on for a few seconds and then
ECA10021
goes off.
3. If the indicator does not come on,
have a Yamaha dealer check the
electrical circuit.
V-belt replacement indicator
"V-BELT"
This indicator flashes every 20000 km
(12500 mi) when the V-belt needs to
be replaced.
The electrical circuit of the indicator
can be checked according to the
following procedure.
1. Turn the key to "ON".
2. Check that the indicator comes
3. If the indicator does not come on,
Self-diagnosis device
This model is equipped with a self-
diagnosis device for various electrical
circuits.
If a problem is detected in any of tho-
se circuits, the multi-function display
will indicate an error code.
If the multi-function display indicates
such an error code, note the code
number, and then have a Yamaha
dealer check the vehicle.
NOTICE
If the multi-function display indica-
tes an error code, the vehicle
should be checked as soon as pos-
sible in order to avoid engine
damage.
3-8
on for a few seconds and then
goes off.
have a Yamaha dealer check the
electrical circuit.
3
ECA11790