Adjusting A Headlight Beam; Replacing The Tail/Brake Light Bulb - Yamaha GRIZZLY 700 YFM7FGPY Owner's Manual

ECB00670
NOTICE
Make sure the headlight bulb holder cover is
securely fitted over the bulb holder and seated
properly.
9. Adjust the headlight beam if necessary.
EBU25551

Adjusting a headlight beam

ECB00690
NOTICE
It is advisable to have a Yamaha dealer make
this adjustment.
To raise a headlight beam, turn the headlight beam
adjusting screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).
1. Headlight beam adjusting screw
EBU25641

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, replace it as
follows.
1. Remove panel I. (See page 8-8.)
2. Remove the bulb holder (together with the
bulb) by turning it counterclockwise.
8-62
8