Auxiliary Dc Jack - Yamaha GRIZZLY 700 YFM7FGPY Owner's Manual

1. Special wrench
Spring preload setting:
Minimum (soft):
1
Standard:
3
Maximum (hard):
5
EWB00400
WARNING
Always adjust the shock absorber assemblies
on the left and right side to the same setting.
Uneven adjustment can cause poor handling
and loss of stability, which could lead to an ac-
cident.
EBU19181

Auxiliary DC jack

The auxiliary DC jack is located at the front right
side of the ATV. The auxiliary DC jack can be used
for suitable work lights, radios, etc. The auxiliary
DC jack should only be used when the engine is
running.
1. Set the light switch to "OFF".
2. Start the engine. (See page 6-1.)
3. Open the auxiliary DC jack cap, and then in-
sert the accessory power plug into the jack.
4-22
4