Coolant - Yamaha GRIZZLY 700 YFM7FGPY Owner's Manual

ECB00410
NOTICE
Be sure no foreign material enters the differen-
tial gear case.
6. Install the oil filler bolt, and then tighten it to the
specified torque.
Tightening torque:
Differential gear oil filler bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
7. Check the differential gear case for oil leak-
age. If oil is leaking, check for the cause.
EBU23470

Coolant

8
The coolant level should be checked before each
ride. In addition, the coolant must be changed at
the intervals specified in the periodic maintenance
and lubrication chart.
EBU27123
To check the coolant level
1. Place the ATV on a level surface.
TIP
The coolant level must be checked on a cold en-
gine since the level varies with engine tempera-
ture.
2. Check the coolant level in the coolant reser-
voir.
TIP
The coolant should be between the minimum and
maximum level marks.
1. Maximum level mark
2. Minimum level mark
3. If the coolant is at or below the minimum level
mark, remove panel D. (See page 8-8.)
8-31