Table of Contents
Advertisement
EN 10
5.
L04HE AA
7. ISP Mode
Can be used to switch on the television to ISP mode (for
uploading software
8. Options
To set the Option Bytes. See chapter 8.3.1 for a detailed
description.
9. Tuner
To align the Tuner. See chapter 8.3.3 for a detailed
description.
10. White Tone
To align the White Tone. See chapter 8.3.4 for a detailed
description.
11. Geometry
To align the Geometry. See chapter 8.3.5 for a detailed
description.
How to Navigate
Use one of the following methods:
•
In SDAM, select menu items with the CURSOR UP/DOWN
key on the remote control transmitter. The selected item
will be highlighted. When not all menu items fit on the
screen, move the CURSOR UP/DOWN key to display the
next / previous menu items.
•
With the CURSOR LEFT/RIGHT keys, it is possible to:
–
Activate the selected menu item.
–
Change the value of the selected menu item.
–
Activate the selected submenu.
•
When you press the MENU key in a submenu, you will
return to the previous menu.
How to Store Settings
To store settings first go back to the main menu (fig. 5-1) with
"MENU" button on the remote control and leave the SDAM with
the "STANDBY" button on the remote control.
How to Exit
Switch the set to STANDBY by pressing the power button on
the remote control transmitter. The error buffer is cleared. (If
you switch the set 'off' by removing the Mains, the set will return
in SDAM when the Mains is re-applied and the error buffer will
not be cleared.)
5.2.2
Customer Service Mode (CSM)
Purpose
When a customer is having problems with his TV-set, he can
call his dealer. The service technician can than ask the
customer to activate the CSM, in order to identify the status of
the set. Now, the service technician can judge the severness of
the complaint. In a lot of cases he can advise the customer how
to solve the problem, or he can decide if it is necessary to visit
the customer.
The CSM is a read only mode, therefore modifications in this
mode are not possible.
How to enter
To enter the CSM by pressing RECALL on the System 7
remote control RG4172BK.
After switching ON the Customer Service Mode, the following
screen will appear:
Service Modes, Error Codes, and Fault Finding
5.3
5.3.1
CSM Menu
1
A
A
A A B C
X . Y
2
C O D E
X X
X X
X X
3
O P
X X X
X X X
X X X
4
D E T E C T E D
S Y S T E M
5
N O T
T U N E D
S K I P P E D
6
T I M E R
7
C O
X X
C L
X X
B R
8
V L
X X
B L
X X
9
T R
X X
B S
X X
10
M O D E
X X X X X X X X X X X
11
P R O G R A M
N O .
X X X
Figure 5-2
1. Software identification of the main micro controller (see
paragraph 5.2.1 for an explanation).
2. Error code buffer (see paragraph 5.4 for more details).
Displays the last five errors of the error code buffer.
3. In this line, the Option Bytes (OB) are visible. Each Option
Byte is displayed as a decimal number between 0 and 255.
The set may not work correctly when an incorrect option
code is set. See chapter 8.3.1 for more information on the
option settings.
4. Indicates which color and sound system is installed for the
selected pre-set.
5. Indicates if the set is not receiving an IDENT signal on the
selected source. It will display NOT TUNED.
6. Indicates if the sleep timer is enabled.
7. Value indicates parameter levels at CSM entry.
CO= CONTRAST, CL= COLOR, BR= BRIGHTNESS, HU=
HUE, SH= SHARPNESS
8. Value indicates parameter levels at CSM entry.
VL= VOLUME LEVEL, BL= BALANCE LEVEL
9. Value indicates parameter levels at CSM entry (only for
stereo sets).
TR= TREBLE, BS= BASS
10. Mode Commercial = Hotel / Institutional mode or mode
Consumer. Smartport. Indicates whether the Smart Port is
selected or not.
11. Program NO. TV. Indicates to what channel the TV is
tuned.
How to Exit
Use one of the following methods:
•
Press any button of the remote control transmitter keys.
•
Press RECALL on a System 7 remote control (the RC-
transmitter RG4172BK).
•
Switch-off the TV set with the Mains switch.
Problems and Solving Tips Related to CSM
Picture Problems
Note: The problems described below are all related to the TV
settings. The procedures used to change the value (or status)
of the different settings are described.
Picture too Dark or too Bright
If:
•
The picture improves when you have press the AUTO
PICTURE button on the remote control transmitter, or
•
The picture improves when you enter the Customer
Service Mode,
Then:
1. Press the AUTO PICTURE button on the remote control
transmitter repeatedly (if necessary) to choose
PERSONAL picture mode.
C S M
X X
X X
X X X
X X X
X X X
X X X
D E T E C T E D
S O U N D
X X
H U
X X
S H
X X
S M A R T P O R T X X X
E_14820_040.eps
011204
Advertisement
Table of Contents
