ment and the coolant temperature
warning indicator flash, stop the vehi-
cle and let the engine cool. (See page
6-43.)
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Select mode
The various functions of this multi-
function display are adjusted in the Se-
lect mode.
TIP
The transmission must be in neu-
tral to change settings in this
mode.
Shifting the transmission into gear
saves all settings made, then can-
cels the Select mode and displays
the Normal mode in all screens.
Depending on the screen, pushing
"RESET" saves settings or can-
cels the Select mode to display
the Normal mode.
Push and hold "SELECT" and "RE-
SET" for at least three seconds to enter
the Select mode.
INSTRUMENT AND CONTROL FUNCTIONS
ECA10022
The following items can be set/adjust-
ed in this mode:
brightness
shift timing indicator light
clock
stopwatch
countdown clock
system status
maintenance counters
TIP
To return to the Normal mode, push
"SELECT" to scroll to " ", then push
"RESET".
Adjusting the brightness
This function allows you to adjust the
brightness of the tachometer panel
and speedometer ("Meter panel"), the
tachometer needle ("Needle"), and the
multi-function display ("Display") to
suit the outside lighting conditions.
1. Push
"SELECT"
"Brightness".
3-10
2. Push "RESET", then push "SE-
LECT" to scroll through the func-
tions and to highlight an item.
3. Push "RESET"; the brightness lev-
el segments for the selected item
starts flashing.
4. Push "SELECT" to highlight the
desired brightness level.
5. Push "RESET" to set the bright-
ness level.
6. Push "SELECT" to scroll to " ",
then push "RESET" to return to
the previous menu.
to
highlight
3