Toro Z MASTER Z500 series Setup Instructions page 13

Step
15
Delivering the Machine to the Customer
Parts needed for this step:
1
Operator's Manual
1 Parts Catalog
1
Engine Owner's Manual
1 Registration Card
1 Safety Video
2 Key
Procedure
At delivery, Fill in the model and serial number and complete the items listed in the following table
and initial each when finished.
Model No.
Dealer Initial Customer Initial
Serial No.
Check Procedure
Show the customer where the following features are located and how
they function:
•
Fuel tank caps
•
Oil ll cap/Oil dipstick
•
Spark plug(s)
• Engine oil lter
• Engine oil drain
• Fuel lters
• Air lter
• Radiator coolant (if applicable)
• Hydraulic uid reservoir
• Hydraulic lter
Battery
•
• Ignition switch
• Throttle lever
• Choke (if applicable)
• Power take off switch (PTO)
• Motion control levers
• Parking brake
• Mower height-of-cut
• Lift assist lever (if applicable)
13