Side-Discharging The Clippings - Toro 20332 Operator's Manual

1. Clean here
Side-Discharging the
Clippings
Use the side discharge for cutting very tall grass.
If the grass bag is on the machine and the bag-on-demand
lever is in the Bagging position, move the lever to the
Recycling position; refer to
Lever (page 11).
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.
Installing the Side-Discharge Chute
Lift up the side deflector and install the side-discharge chute
(Figure 19).
Figure 18
Operating the Bag-on-Demand
Removing the Side-Discharge Chute
To remove the side-discharge chute, lift up the side deflector,
remove the side-discharge chute, and lower the side-discharge
deflector.
12
Figure 19