Installing The Grass Bag - Toro 20332 Operator's Manual

Installing the Grass Bag

1. Raise and hold up the rear deflector
Figure 16
1. Notches
2. Rear deflector
2. Install the grass bag, ensuring that the pins on the bag
rest in the notches on the handle
3. Lower the rear deflector.
Removing the Grass Bag
To remove the bag, reverse the steps in
Bag (page 11).
(Figure 16).
3. Grass-bag pin (2)
(Figure 16).
Installing the Grass
Operating the Bag-on-Demand Lever
The bag-on-demand feature allows you to either collect or
recycle grass and leaf clippings while the grass bag is attached
to the machine.
•
For bagging the grass and leaf clippings, press the button
on the bag-on-demand lever and move the lever forward
until the button on the lever pops up
1. Bag-on-demand lever (in bagging position)
•
For recycling the grass and leaf clippings, press the button
on the lever and move the lever rearward until the button
on the lever pops up.
Important: For proper operation, remove any grass
clippings and debris from the bag-on-demand door and
the surrounding opening
the bag-on-demand lever from 1 position to another.
WARNING
The blade is sharp; contacting the blade can
result in serious personal injury. Also, an open
rear-discharge area could allow small stones and
other similar debris to be thrown toward you or
bystanders, resulting in serious personal injury or
death.
Stop the engine and wait for all moving parts to
stop before cleaning the bag-on-demand door and
the surrounding opening.
11
(Figure 17).
Figure 17
(Figure 18) before you move