Safety And Instructional Decals - Toro Z MASTER G3 Operator's Manual

Safety and Instructional
Decals
Safety decals and instructions are easily visible to the operator and are located near any area of
potential danger. Replace any decal that is damaged or lost.
1. Grease
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 115-149 N•m (85-110 ft-lb).
1. Machine speed
2. Fast
3. Slow
58-6520
93-7818
99-8936
4. Neutral
5. Reverse
1. Read the Operator's
Manual.
2. Height of cut
1. Warning-do not touch or approach moving belts; remove
the ignition key and read the instructions before servicing
or performing maintenance.
1. Warning—do not touch the hot surface.
8
99-8939
3. Remove the ignition key
and read the instructions
before servicing or
performing maintenance.
106–2655
106-5517