Using the Motion Control Levers
Figure 22
1. Motion control
lever-neutral lock position
2. Center, unlocked position
3. Forward
Driving Forward
Note: The engine will kill if the traction control levers
are moved with the parking brake engaged.
To stop, pull the motion control levers to the neutral
position.
1. Release the parking brake; refer to Releasing the
Parking Brake in Operation.
2. Move the levers to the center, unlocked position.
3. To go forward, slowly push the motion control
levers forward (Figure 23).
4. Backward
5. Front of machine
Driving Backward
1. Move the levers to the center, unlocked position.
2. To go backward, slowly pull the motion control
levers rearward (Figure 24).
23
Figure 23
G008953
Figure 24
G008952