Poweredge ™ R630 Server - Dell PowerEdge R630 Installing Manual

Installing the Dell PowerEdge R630 Server
No. Item
5 Serial Connector
6 Video Connector
7 USB Connectors (2)
8 PCIe Expansion
Card Slot 2 (riser 3)
9 Ethernet
Connectors (4)
10 Power Supply
(PSU1)
11 Power Supply
(PSU2)
More information can be found in the Back-panel features and indicators section of the Dell Owner's
Manual.
Dell R630 server specifications
Base unit Baseline
R630 1U chassis, dual socket
Processor Intel E5-2620v3, Six Core 2.4 GHz
(Haswell)
4 memory channels per CPU with up to 3
DIMMs per channel (most applications use
1 or 2 DIMMs per channel to optimize
memory speed)
Memory 4 GB DDR4 RDIMMs
November 2015
Icon Description
Allows you to connect a serial device to the system.
Allows you to connect a VGA display to the system.
Allows you to connect USB devices to the system. The ports are USB
3.0-compliant.
Allows you to connect a full-height half-length PCIe expansion card.
Note:
If your server is equipped with 6 or 8 NIC ports this slot can contain
two port 10/100/1000 Mbps NIC connectors or two 100 Mbps/
1Gbps/10 Gbps SFP + connectors.
Four integrated 10/100/1000 Mbps NIC connectors (Avaya Standard).
Note:
NIC port numbers are read from left to right, starting with Port 1,
then continuing to Ports 2, 3, and 4.
Wattage and voltage type depends on configuration.
Wattage and voltage type depends on configuration.
Installing the Dell PowerEdge R630 Server
Comments on this document? infodev@avaya.com
Options
Listed below
• Intel E5–2640v3 Eight Core/2.6 GHz
(Haswell)
• Intel E5–2680v3 Twelve Core/2.5 GHz
(Haswell)
• Upgradable to dual processors for any of
the three processors.
Max Capacity for memory (4 GB RDIMM):
• 48 GB, 12 x 4 GB (1 proc)
• 96 GB, 24 x 4 GB (2 proc)
Table continues...
12