Sanyo DC-MCR60 Instruction Manual page 3

Note:
- Do not connect the mains lead to an AC outlet until all connec-
tions have been made.
- The system is not completely disconnected from the mains when
the z/ON button is set to the z position.
Speakers
Connect the connector of the left speaker lead to the "L" SPEAKERS
socket and the connector of the right speaker lead to the "R" socket.
If you have difficulty inserting the speaker lead connector, turn it over
and reinsert it.
FM Aerial
FM indoor aerial is sufficient to receive broadcasts. Extend the aerial
wire as straight as possible and, while listening to the sound from the
system, secure it in a position which yields minimal distortion and
noise.
AM Loop aerial
Assemble the loop aerial as shown in figure.
4 5 6 7 8 9
M A D C K
3
2
1
19
18
17
CONTROLS
10
14
15
16
Unwind the aerial wires, then connect
them to the AM LOOP terminals. Place
the loop aerial in a position which
yields the best AM reception, or attach
it to a wall or other surface as shown
in figure.
Note:
To minimize noise, the speaker, mains
and any other leads should not come
close to the indoor or external aerial
lead and AM loop aerial. Do not place
the aerial leads close to the system.
Headphones
Connect stereo headphones (not supplied) to the PHONES socket for
monitoring or for private listening. The speakers are automatically dis-
connected when headphones are connected.
1. Power button (z/ON)
2. Display
3. CD compartment
4. Record button (REC)
5. Play button (PLAY)
6. Rewind button (REW)
7. Fast forward button (FFWD)
8. Stop/Eject button (STOP/EJECT)
9. Pause button (PAUSE)
10.Cassette button lid/Cassette holder
11. Open button for CD compartment lid (CD DOOR OPEN)
11
12.Volume control (VOLUME)
13.Remote sensor (IR)
14.Function button (FUNCTION)
15.Memory button (MEMORY)
12
16.Clock/Timer button (CLOCK/TIMER)
13
17.Stop button (N)
18.Skip/Search/Tuning buttons (F/TUNING -, E/TUNING +)
19.Play/Pause button (I)
-2-
Screws (not supplied)