How To Set The Calendar; Clock Manually; The Alarm - Oregon Scientific RM962A Instruction Manual

CALENDAR AND ALARM TIME DISPLAY
The calendar and the alarm-time share the same section of the
display.
The calendar is displayed in a month-day format.
calendar mode
To change the calendar display to the alarm-time display:
• When the calendar is displayed, press ALARM once.
To change the alarm-time display to the calendar display:
• When the alarm time is displayed, press MODE once.

HOW TO SET THE CALENDAR

CLOCK MANUALLY

If the unit is taken outside of the range of radio signal it will need
to be manually set.
To manually set the clock:
1. When the calendar is displayed, press and hold MODE for two
seconds. The hour value will start to blink.
2. Enter the hour using the [
rapidly increase the value.
alarm mode
] button. Hold down the button to
3. Press MODE to confirm and proceed to set the minute, year,
month, day and display language.
4. For the display language, you can choose between (E) for
English, (F) for French and (S) for Spanish.
Language
Monday Tuesday Wed. Thursday Friday Saturday Sunday
English
French
Spanish
5. When finished, press MODE to return to normal display. If
changes are made on the minutes, the seconds will reset and
start from zero.
HOW TO SET AND ACTIVATE

THE ALARM

To set the alarm time:
1. Press and hold ALARM for two seconds when the alarm time is
displayed.
2. Enter the value for the hour digits using the [
down the button to rapidly increase the value. Press ALARM to
confirm and go to the minute digits. Enter the value and press
ALARM to confirm.
4
Day-of-the-week
] button. Hold