Set-Up/Maintenesnce; Installing Mechanical Couplers - M.T.H. HO 4-6-6-4 Challenger Engineer's Manual

SET-UP
Connecting Engine & Tender
Now grasp the tender with both hands as shown below and place a finger on each
side of the drawbar near the connector. Now using your fingers, push the connectors
together. The connector will make a slight click when
Installing The Mechanical Couplers
Your HO engine comes with a mechanical coupler that can be attached to the rear of
the tender. Follow the steps below to install your mechanical coupler or any other
Kadee-compatible couplers.
Insert the coupler (as shown) and
screw into place
M.T.H. HO 4-6-6-4 Challenger Steam Engine
Place the spacer
8