Engine Diagram - M.T.H. HO 4-6-6-4 Challenger Engineer's Manual

ENGINE DIAGRAM

Boiler
Cab Interior
Light
Fireman/
Engineer
Figures
Tender
Connecting the Engine to the Tender
Your MTH steam engine is equipped with a tetherless drawbar. There is no unsightly
cable or box showing between the engine and the tender to detract from the appearance
of the model. The electrical connections pass through conductors in the drawbar, so it
is important that the connector be properly inserted. The connector is fixed to the rear
end of the drawbar. The mating connector is attached to a swivel connection on the
front of the tender frame. The drawbar is connected to the engine chassis with a screw
and should not need any attention.
In order to mate the connectors of the drawbar and the tender, place the engine and the
tender on the track. Position the tender over the drawbar connector and insert the
drawbar pin on the swivel connector into the hole in the drawbar.
Drive Wheels
Control Hatch
M.T.H. HO 4-6-6-4 Challenger Steam Engine
Smoke Stack
Pilot Truck
Drive Wheels
7
Lighted
Classification
Lights