• Remove the bolts and nuts securing the hitch
tube to frame brackets (Figure 8).
• Secure the tube to the frame with the bolts and
flange nuts.
4. Connect the blower clevis hitch to the tow vehicle
hitch with the hitch pin and clevis (Figure 9).
1. Hitch pin
2. Tow vehicle hitch
Figure 9
3. Clevis
Product Overview
Controls
Engine Stop
Press the Engine Stop button to stop the engine
(Figure 10).
1. Nozzle direction, right
2. Engine stop
3. Throttle, fast
Engine Start
After completing the starting sequence, press the Engine
Start button to start the engine (Figure 10). Refer to
Starting the Engine for the starting sequence.
Nozzle Direction
Press the right or left button to rotate the nozzle to the
desired direction (Figure 10).
Engine Speed
Press the Fast (rabbit) or Slow (turtle) button to increase
or decrease the speed of the engine (Figure 10).
Ignition Switch
The ignition switch (Figure 11) which is used to start
and stop the engine, has three positions: OFF, RUN and
START. Rotate key clockwise to the START position
to engage the starter motor. Release the key when
the engine starts. The key will move automatically
to the ON position. To shut engine off, rotate key
counterclockwise to the OFF position.
11
Figure 10
4. Nozzle direction, left
5. Throttle, slow
6. Engine start