Removing The Snowthrower From Storage - Toro 38657C Operator's Manual

areas before painting, and use a rust preventative to
prevent the metal parts from rusting.
17. Tighten all loose screws, bolts, and locknuts. Repair
or replace any damaged parts.
18. Cover the snowthrower and store it in a clean, dry
place out of the reach of children. Allow the engine
to cool before storing it in any enclosure.
Removing the Snowthrower
from Storage
1. Remove the spark plug and spin the engine rapidly
using the starter to blow the excess oil from the
cylinder.
2. Install the spark plug by hand and then torque it to
15 ft-lb (20.4 N-m).
3. Connect the spark plug wire.
4. Perform the annual maintenance procedures as given
in the Recommended Maintenance Schedule.
26