Toro 38657C Operator's Manual page 13

Figure 25
1. Ignition key
4. Firmly push in the primer with your thumb 2 times
(15°F or -9°C or above) or 4 times (below 15°F or
-9°C), holding the primer in for a second before
releasing it each time (Figure 26).
Figure 26
5. Rotate the choke to the Choke position (Figure 27).
6. Move the throttle to the Fast position (Figure 28).
7. Start the snowthrower pulling the recoil starter or
pressing the electric-starter button (Figure 29).
1. Electric-starter button
2. Electric starter plug
Note: To use the electric starter, connect a power
cord to the electric starter plug first and then to a
power outlet.
Important: To prevent damaging the electric
starter, run it in short cycles (5 seconds
13
Figure 27
Figure 28
Figure 29
3. Recoil starter