Changing The Engine Oil - Toro 74942TE Operator's Manual

2
1
3
4
7
6
9
8
Figure 44

Changing the Engine Oil

Service Interval: After the first 8 hours
Note: Dispose of the used oil at a recycling center.
g024213
1. Start the engine and let it run for 5 minutes. This
2. Park the machine so that the rear is slightly lower than
3. Disengage the PTO, move the motion-control levers to
4. Stop the engine, remove the key, and wait for all
5
10
G008792
37
Every 100 hours (more often in dirty or dusty
conditions)
warms the oil so it drains better.
the front to ensure that the oil drains completely.
the neutral-locked position and set the parking brake.
moving parts to stop before leaving the operating
position (Figure 45).
1
3
4
Figure 45
g024213
2
4
5
G008793