Operating The Ignition Switch; Using The Fuel-Shutoff Valve - Toro 74942TE Operator's Manual

1
2
Figure 16
1. On
G008959
2. Off

Operating the Ignition Switch

1. Turn the ignition key to the Start position (Figure 17).
When the engines starts, release the key.
Important: Do not engage starter for more than 5
seconds at a time. If the engine fails to start allow
a 15 second cool-down period between attempts.
Failure to follow these instructions can burn out
the starter motor.
Note: Additional starting cycles may be required
when starting the engine for the first time after the fuel
system has been without fuel completely.
2. Turn the ignition key to stop to stop the engine.

Using the Fuel-shutoff Valve

The fuel-shutoff valve is located under the seat. Move the
seat forward to access it.
Close the fuel-shutoff valve for transport, maintenance, and
storage.
Ensure the fuel-shutoff valve is open when starting the
engine.
1
2
G008948
1. On
22
G008947
Figure 17
Figure 18
2. Off