Fuel System Maintenance; Cleaning The Fuel Filter - Toro greensmaster 1610 Operator's Manual

2. Clean around the spark plug and remove it from the
cylinder head.
Important: Replace a cracked, fouled, or dirty
spark plug. Do not sand blast, scrape, or clean
electrodes because engine damage could result
from grit entering the cylinder.
3. Ensure that the air gap is correct (Figure 27).
Figure 27
1. Spark plug air gap: 0.61– 0.71 mm (0.024–0.028 inch)
4. Install the correctly gapped spark plug and tighten it to
23 N-m (17 ft.-lb).
5. Install the spark plug wire on the spark plug.
1
g021300
Fuel System
Maintenance

Cleaning the Fuel Filter

Service Interval: After the first 20 hours
Every 100 hours
1. Close the fuel shut–off valve and unscrew the bowl
from the filter body (Figure 28).
1
1. Bowl
2. Clean the bowl and filter in clean gasoline and install it.
24
2
Figure 28
2. Fuel shut–off valve
G016988