Product Overview; Controls - Toro greensmaster 1610 Operator's Manual

Product Overview

Controls

1 2 3
G017592
Figure 10
1. Traction drive lever
2. Throttle control
3. On/off switch
4. Hour meter
Throttle Control
The throttle control (Figure 10) is located on the rear
right side of the control panel. The lever connects to
and operates the throttle linkage to the carburetor. See
Specifications (page 14)for engine speed.
Traction Drive Lever
The traction drive lever (Figure 10) is located on the front
right side of the control panel. It has two positions: Neutral
and Forward. Pushing the lever forward engages the traction
drive.
Service Brake
The service brake (Figure 11) is located on the top left front
side of the control panel. You can use the brake to slow or
stop the machine.
4 5
6 7
5. Service brake
6. Parking brake
7. Operator presence control
(optional)
Parking Brake
The parking brake (Figure 12) is located at the base of the
service brake. Fully engage the service brake and push the
parking brake knob to allow the service brake to rest on the
parking brake pin. Engage the service brake to release the
parking brake. You must release the brake before the traction
drive is engaged.
On/Off Switch
The on/off switch (Figure 10) is located on the top of the
control panel. Move the switch to the On position to start the
engine and the Off position to stop the engine.
Operator Presence Control (Optional)
If equipped, the operator presence control (Figure 10) is
located on the rear of the handle. Push the operator presence
control against the handle. If equipped, the operator presence
control must be engaged before moving the traction drive
lever or the engine will stop.
13
G016976
Figure 11
G016977
Figure 12