If the BUCKET FULL light does not
extinguish, check that the float is correctly
snapped in place as indicated by the
diagram.
Continuous drain operation
For continuous drainage operation, you
will need a garden hose and a drain
nearby to discharge the water
1. Unscrew the drain cap on the back
side of the unit. (fig.1)
2. Insert the female threaded end of the
hose onto the drain connector of the
unit (fig. 2).
3. Screw the garden hose onto the
threaded portion of the connector.
(fig. 3)
4. Make sure all the connection is secure
and there are no leaks.
5. Direct the hose toward the drain,
making sure that there are no kinks
that will stop the water flowing.
6. Place the end of the hose into the
drain. (fig. 4)
7. Select the desired humidity setting and
fan speed on the unit for continuous
draining to start.
fig. 1
fig. 2
ENGLISH
7