Sound Pressure For A Flex 18; Sound Power For A Flex 18; Vibration For A Flex 18; Sound Pressure For A Flex 21 - Toro 04018 Operator's Manual

• If the engine must be running to perform a
maintenance adjustment, keep hands, feet,
clothing, and any parts of the body away from
the cutting unit, attachments, and any moving
parts, especially the screen at the side of the
engine. Keep everyone away.
• To ensure safety and accuracy, have an
Authorized Toro Distributor check the
maximum engine speed with a tachometer.
Maximum governed engine speed should be
3600 RPM.
• If major repairs are ever needed or if assistance
is desired, contact an Authorized Toro
Distributor.
• Use only Toro-approved attachments and
replacement parts. The warranty may be
voided if used with unapproved attachments.

Sound Pressure for a Flex 18

This unit has a maximum sound pressure level
at the operator's ear of 85 dBA, based on
measurements of identical machines per EN 11094
and EN 836.

Sound Power for a Flex 18

This unit has a guaranteed sound power level
of 96 dBA, based on measurements of identical
machines per EN 11094.

Vibration for a Flex 18

This unit does not exceed a hand/arm vibration
level of 2.50 m/s 2 , based on measurements of
identical machines per EN 1033.

Sound Pressure for a Flex 21

This unit has a maximum sound pressure level
at the operator's ear of 85 dBA, based on
measurements of identical machines per EN 11094
and EN 836.

Sound Power for a Flex 21

This unit has a guaranteed sound power level
of 98 dBA, based on measurements of identical
machines per EN 11094.

Vibration for a Flex 21

This unit does not exceed a hand/arm vibration
2
level of 2.50 m/s , based on measurements of
identical machines per EN 1033.
7