Table of Contents
Advertisement
3
2
Figure 4
1. Tank bracket
2. Slots
3. Plastic clips
4. Remove red cap from end of fuel line and from end of
elbow fitting on gas tank. Slide end of fuel line onto
elbow fitting (Fig. 5). Secure fuel line in place with
fuel line clamp.
3
1
Figure 5
1. Fuel line clamp
2. Fuel line
4
5
1
530
4. Gas tank
5. Self-tapping screw
2
2045
3. Elbow fitting
Discharge Tunnel Plug
1. Open the discharge door by pulling forward on the
handle and moving it rearwards (Fig. 6). Hold the
discharge door handle to prevent the spring-loaded
door from closing while inserting the plug.
2. Since the plug is slightly wider than the discharge
tunnel opening, rotate the plug clockwise slightly
while inserting it (Fig. 6). Make sure the arrow on the
plug decal is pointing upwards.
1. Discharge door handle
3. Push the plug all the way in until the spring clip on the
bottom of the plug clicks into place, locking the plug
securely into the discharge tunnel (Fig. 7). Release
discharge door handle to lock top of plug.
1. Spring clip
6
1
2
Figure 6
2. Plug rotated clockwise
1
Figure 7
m–262
m–275
Advertisement
Table of Contents
