Toro 44538 Operator's Manual page 16

•
Do not exceed 20 mph when transporting blower.
•
Do not touch the engine or muffler while the engine is
running or soon after it is stopped. These areas could be
hot enough to cause a burn.
Important: Raise the nozzle before transporting the
blower. If the nozzle is left in the down position during
transport, the nozzle may contact the ground and
damage to the nozzle may occur.
Note: In the unlikely event of a major static electrical
discharge event, the controller may lower the engine speed
to low idle. Full speed can be restored by pressing the fast
(rabbit) button on remote control.
16