Product Overview; Specifications - Toro 20835 Operator's Manual

wiping the dipstick clean and then inserting, but not
screwing in, the oil fill cap into the hole (Figure 5).
Note: Fill the engine crankcase with oil until the
dipstick indicates that the engine oil level is correct
as shown in Figure 5. If you overfill the engine with
oil, remove the excess oil as directed in Changing
the Engine Oil.
4. Install the dipstick and hand tighten it securely.
Important: Change the engine oil after the first
5 operating hours ; change it yearly thereafter.
Refer to Changing the Engine Oil.

Product Overview

1. Recycling/bagging lever
2. Cutting height lever
3. Oil fill/Dipstick
4. Grass bag
5. Recoil start handle
6. Self-propel drive bar
7. Blade control bar

Specifications

Model Weight
20835 84 lb
(38 kg)
20836 86 lb
(39 kg)
6
Figure 6
8. Traction-assist handle
9. Rear door
10. Fuel tank cap
11. Washout port (not shown)
12. Air filter
13. Primer
14. Spark plug
Length Width Height
60 in 21 in
(152 cm) (53 cm) (109 cm)
60 in 21 in
(152 cm) (53 cm) (109 cm)
43 in
43 in