Using The Self-Propel Drive; Stopping The Engine - Toro 20835 Operator's Manual

1. Blade control bar
3. Pull recoil start handle (Figure 13).
Note: If the mower does not start after several
attempts, contact an Authorized Service Dealer.
Figure 12
Figure 13

Using the Self-propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows ar your
sides, and the mower will automatically keep pace with
you (Figure 14).
To disengage the self-propel drive, release the self-propel
drive bar.
Note: The maximum self-propel ground speed is fixed.
To reduce the ground speed, increase the space between
the self-propel drive bar and the handle.

Stopping the Engine

Service Interval: Before each use or daily
To stop the engine, release the blade control bar
(Figure 15).
Important: When you release the blade control
bar, both the engine and blade should stop within
3 seconds. If they do not stop properly, stop using
your mower immediately and contact an Authorized
Service Dealer.
9
Figure 14
Figure 15