Mahindra 16 SERIES Operator's Manual page 31

REAR POWER TAKEOFF (PTO)
PTO Type
GEAR DRIVE................................................Independent PTO
HYDROSTATIC DRIVE.................................Live PTO (Internal over running clutch)
LOCATION ................................... At the rear of transmission
ROTATION ...................................Clockwise from rear of tractor
SHAFT SIZE .................................34.9 mm (1.375 Inch) Diameter, 6Splines
SPEED .........................................540 RPM at 2376 Engine RPM
MID POWER TAKEOFF (PTO) OPTION
PTO Type
GEAR DRIVE ...................................................................Independent PTO
HYDROSTATIC DRIVE ...................................................Live PTO
LOCATION ...................................At the Bottom of Transmission
ROTATION ...................................Clockwise from rear of tractor
SHAFT SIZE .................................25.4mm (1 Inch) Diameter, 15Splines
SPEED .........................................2000 RPM at 2525 Engine RPM
DRAWBAR
TYPE ...........................................Fixed Type
DISTANCE FROM HITCH HOLE TO THE END OF PTO SHAFT
MAXIMUM VERTICAL LOAD ON DRAWBAR
..........................................358mm (14.092 inch)
..........................................440kgf (969 lbf)
20
SPECIFICATIONS