Mahindra 16 SERIES Operator's Manual page 25

SECOND POSITION
STEP6
POSITION PIN
LOCK PIN
Remove the lock pin from the position pin.
STEP7
POSITION PIN
While holding the ROPS bar CAREFULLY
remove the position pins.
WARNING:
place. Correct parts may be obtained from your dealer.
Rollover protection is provided only with proper assembly. Lock pins, must be in
STEP8
Down the ROPS bar slowly from the second
position.
While holding the ROPS bar carefully install
the position pins.
STEP9
LOCK PIN
Install the lock pin to the position pin.
STORED POSITION
Adjustment of Foldable ROPS.
If you feel less friction when the ROPS is
at the upright position , tighten the Lock
Nut until you feel the right friction in the
movement.
14
SAFETY/DECALS
POSITION PIN
POSITION PIN
LOCK NUT