SWAGTRON T3 User Manual page 21

any hardware store.)
1. Power your SWAGTRON® off.
2. Rotate the SWAGTRON® until both wheel bases are level to the ground. We recommend using a level for
best results.
3. While the SWAGTRON® remains level, hold the POWER BUTTON down to turn on the unit and keep
holding the button down.
4. Wait an additional 3 seconds and you will hear a single beep. Release the POWER BUTTON and the front
LEDs will begin fl ashing.
5. Press the POWER BUTTON again to turn the SWAGTRON® off.
6. Once again, press the POWER BUTTON to turn on your newly calibrated SWAGTRON® unit.
If the SWAGTRON® is still not calibrated correctly, repeat step 1 to 6 or contact customer support for additional
assistance.
English 22 Swagtron T3 Hands Free Smart Board