Calibration - SWAGTRON T3 User Manual

right.
STEPPING OFF THE SWAGTRON®
Make sure the SWAGTRON® is completely stopped, then step back with dominant foot, then quickly step off with
the other foot. Please be careful!
The SWAGTRON® has an inertial dynamic stabilization system that keeps you upright. However,
it will stop detecting you if you lean too far left or right or if you take a foot off of the board.
CAUTION
Slow down before turning or you will fall off and be injured.
NOTE:
+ Avoid turning suddenly when riding fast, as this may result in accidents.
+ Avoid riding sideways or turning on slopes. The self-balancing sensors may malfunction and may require
recalibration.
+ Do not step on the center pivot point of the SWAGTRON®.
+ If the T3 fl ips over or rotates more than 180 degrees, motor and riding capability will be disabled. To
restore normal functions, power off the unit then and power the unit back on. After this, continue to ride
as normal.

3.3 CALIBRATION

If your SWAGTRON® seems to pull to the left or right during
your ride, you may need to recalibrate its sensors. The process
requires a fl at stable surface and optionally a level (available at
Swagtron T3 Hands Free Smart Board 21 English